RF Power Meter v2

Every FPVers Toolbox Needs One…

FPV is made possible thanks to two RF links, a control link, and a video link. Without an RF Power Meter, a pilot has no way to test these critical RF links.

Test equipment for microwave (GHz) links is not cheap. ImmersionRC changed this several years ago and provided our ‘Power Meter v1’ to the FPV community. The v2 is the result of listening to customer feedback. We added an internal battery an internal attenuator and a few features that every FPVer needs.

Accurate RF Power Measurements

The RF Power Meter v2 can deliver accurate power measurements for both types of RF signals.

Integrated Li-ion Battery

The v2 contains an integrated Lithium Ion battery, which will power the meter for at least 8 solid hours. With auto-shutdown after periods of inactivity, a single charge will power your meter for days at the race track.

Recharged using a standard micro-USB connector in less than one hour.

PRODUCT SPECIFICATIONS:

• Power Level: -20dBm up to +30dBm

• Calibrated Frequencies: 35, 72, 433, 1200, 2400, 5600-6000MHz in 50MHz steps

• Accuracy: +/- 0.5dB

• Attenuator: 30dB (Internal)

• Battery: 3.7V Lithium Ion cell, 10440 size, 600mAh

• Current Consumption: ~35mA

• Battery Life: ~8 hours

• Auto Shutdown: 5 minute timeout

• Charging: Micro USB cable

• Display: OLED, 128×64 pixels, monochrome

• User Input: Joystick

• Interfaces: USB, power control via CDC

• Antenna: 5.8GHz ‘Sniffer Antenna’ (linearly polarized ~2dBi dipole)

• Adapter: Male to Male SMA adapter